Treatment of formation water at oil fields using granular filters with varying particle sizes

User Rating:  / 2
PoorBest 

Authors:


D.Zh.Abdeli, orcid.org/0000-0002-1753-4952, Satbayev University, Almaty, the Republic of Kazakhstan, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Wisup Bae, orcid.org/0000-0002-2908-2914, Department of Mineral and Resources Engineering, Sejong University, Seoul, the Republic of Korea

A.B.Seiden, orcid.org/0000-0002-4988-8368, Satbayev University, Almaty, the Republic of Kazakhstan, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Adi Novriansyah, orcid.org/0000-0001-6033-326X, Department Petroleum Engineering, Universitas Islam Riau, Pekanbaru, the Republic of Indonesia


повний текст / full article



Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2022, (2): 023 - 030

https://doi.org/10.33271/nvngu/2022-2/023



Abstract:



Purpose.
Increasing oil recovery from reservoirs, reducing water content, and decreasing costs by pumping formation water effectively cleaned of suspended solids allows you to get a picture of the uniform distribution of water over the reservoir and, in general, the quality maintenance of reservoir pressure in productive reservoirs.


Methodology.
The study on water treatment issues for maintaining reservoir pressure at existing oil fields has a variety of approaches. Therefore, the methods of analysis, review, comparison, modeling, experiment were used in the work. The analysis method made it possible to divide the problems of approaches to the formation water preparation for its injection into the reservoir into many elements, which made it possible to learn their properties, connections and relationships. This method contributes to a more detailed structuring of the problem of water treatment. The analogy method uses the study of the technology of preparation of reservoir water with suspended solids. Based on the data, an effective technology was studied for treating formation water from suspended solids and injecting it into a productive formation.


Findings.
The experiments carried out reflect the high-quality water preparation using the developed new industrial sand-gravel filter made of granular materials with variable particle sizes in the vertical direction, taking into account the rational parameters of the column height of the filter working area. The regularities were studied and the process of formation water preparation without suspended solid particles was improved on the basis of the theoretical and experimental studies carried out on a special laboratory unit. The dependence of the reservoir permeability in the bottomhole zone of injection wells on the size of solid suspended particles in the injected water was determined, and rational filter parameters were established for preparing injected water without suspended solid particles into the reservoir using granular materials with a variable fraction and water supply from the bottom up.


Originality.
An effective technology for deep purification of formation water from suspended clay particles is proposed by using filters made of granular materials with a variable particle size. The technical result of the invention is to increase the efficiency of purification of industrial waste and industrial formation waters with suspended solids.


Practical value.
A new method for deep formation water treatment is proposed, which ensures the capture of suspended solids. The results of experiments on establishing the regularity of the process of formation water filtration with suspended clay particles through a porous medium with variable pore sizes and granular particles are presented. A recommendation has been developed for choosing rational parameters and operating modes of a new filter for formation water treatment.



Keywords:
oil reservoirs, water, treatment, filter, granular material, well

References.


1. Dairabai Zh. Abdeli, & Assel B. Seiden (2018). High Performance Water Treatment TechnologyFor The Reservoir Pressure Maintenance At Oil Fields. Journal of Mechanical Engineering Research and Developments, 41(4), 66-81. https://doi.org/10.26480/jmerd.04.2018.66.81.

2. Dayrabay Zh. Abdeli, Wisup Bae, Assel B. Seiden, & Adi Novriansyah (2019). Development of effective technology of deep water treatment from suspended solid particles for formation pressure maintenance at the oil fields. Journal of Mechanical Engineering Research and Developments, 42(3), 24-29. https://doi.org/10.26480/jmerd.03.2019.24.29.

3. Liu He, Gao Yang, Li Guoxin, & Li Yiliang (2013). Simulation of Formation Damage after Long-Term Water Flooding. Journal of Petroleum Engineering, (5). https://doi.org/10.1155/2013/479827.

4. Mullayev, B.T., Abitova, A.Zh., Sayenko, O.B., & Turkpenbayeva,B.Zh. (2016). Uzen deposit. Problems and Solutions: monograph. (Vol.1). Nur-Print.

5. Ivanovsky, V.N., Sabirov, A.A., Bulat, A.V., Degovtsov, A.V., Usenkov, A.V., Brezgin, A.R., , & Shevkun, A.M. (2014). Water purification systems for the needs of reservoir pressure maintenance and field oil treatment. Territory Oil and Gas, (10), 54-59. Retrieved from https://www.neftegas.info/upload/iblock/a4a/a4ab40d013bc953d36c2331f3cf1b079.pdf.

6. Ivanovsky, V.N., Sabirov, A.A., Degovtsov, A.V., Bulat, A.V., Pekin, S.S., Meritsidi, I.A., , & Pyatov, I.S. (2015). Development of a separation unit and water treatment technology for a reservoir pressure maintenance system. Territory Oil and Gas, (3), 106-112. Retrieved from https://tng.elpub.ru/jour/article/view/38/39.

7. Mukhamadeev, R.U., & Voltsov, A.A.(2011). Investigation of the efficiency of formation water treatment by the method of vibroacoustic impact. Oil and gas business, (4), 91-95. Retrieved from http://ogbus.ru/authors/Mukhamadeev/Mukhamadeev_2.pdf.

8. Zentsova, A.Ye., Stolbov, I.V., Tarasov, M.Yu., Tashbulatov, I.A., Kim, A.V., & Klenova, I.V. (2014). Methodological approaches to the use of chemical reagents for oil preparation and oilfield wastewater treatment at fields at a late stage of development. Oil industry, (4), 92-95. Retrieved from https://www.gtng.ru/upload/iblock/af3/15%20Zentsov.pdf.

9. Akimenko, V.V., Perunov, R.Ye., Ostankov, N.A., Kozlov, S.A., Pashkevich, K.L., Nechaev, A.S., & Borisov, G.K. (2016). Increasing the degree of destruction of structural-mechanical barriers of the dispersed phase in the preparation of oil and water. Scientific and technical bulletin OJSC NC Rosneft, (42), 66-70. Retrieved from https://www.rosneft.ru/upload/site1/document_publication/VRN_1_2016.pdf.

10. Golubev, I.A. (2013). Ways and solutions for the treatment of produced water for the reservoir pressure maintenance system. Oil and gas business, (3), 87-96. Territory Oil and Gas. Retrieved from http://ogbus.ru/files/ogbus/authors/GolubevIA/GolubevIA_1.pdf.

11. Busarev, A.V., Selyugin, A.S., Sheshegova, I.G., & Urmitova,N.S. (2015). Hydrocyclone water treatment plants for flooding oil-bearing horizons in order to increase their oil recovery. Oil and gas business, (4), 199-215. https://doi.org/10.17122/ogbus-2015-4-199-215.

12. Ramesh Chandra Yerramilli, P.L.J. Zitha, Sanjay Surya Yerramilli, & Pavel Bedrikovetsky (2013). A Novel Water-Injectivity Model and Experimental Validation With CT-Scanned Corefloods. SPE European Formation Damage Conference & Exhibition, 5-7 June, Noordwijk, the Netherlands, SPE-165194-MS. Retrieved from https://www.adelaide.edu.au/directory/pavel.bedrikovetski?dsn=directory.file;field=data;id=35176;m=view.

13. Kalantariasl, A., Burmester, C., Schulze, K., Storz, J., Kenckeler, S., You, Zh., , & Bedrikovetsky, P. (2018). Produced Water Re-Injection and Disposal in Low Permeable Reservoirs. Journal of Energy Resources Technology, Transactions of the ASME, 141(7). https://doi.org/10.1115/1.4042230.

14. Feia, S., Dupla, J.-C., Ghabezloo, S., Sulem, J., Canou, J., Onaisi, A., , & Aubry, E. (2015). Experimental investigation of particle suspension injection and permeability impairment in porous media. Geomechanics for Energy and the Environment, 3, 24-39. https://doi.org/10.1016/j.gete.2015.07.001.

15. Zhu, X., Ran, Ya., Guo, W., Gai, K., Li, Ya., Yan, C., & Ding, B. (2020). Optimization of reinjection treatment technology for oilfield wastewater in Longdong area. E3S Web of Conferences, 194, 04046. Retrieved from https://www.e3s-conferences.org/articles/e3sconf/pdf/2020/54/e3sconf_icaeer2020_04046.pdf.

16. Tale, F., Kalantariasl, A., & Malayeri, M.R. (2020). Estimating transition time from deep filtration of particles to external cake during produced water re-injection and disposal. Particulate Science and Technology,39(3), 1-10. https://doi.org/10.1080/02726351.2020.1713941.

17. Alem, A., Elkawa, A., Ahr, N.-D., & Wang, H.Q. (2013). Filtration of kaolinite particles in a saturated porous medium: Hydrodynamic effects. Hydrogeology Journal,21(3), 573-586. https://doi.org/10.1007/s10040-012-0948-x.

18. Feia, S., Dupla, J.-C., Ghabezloo, S., Sulem, J., Canou, J., Chabot, B., , & Aubry, E. (2017). An Experimental Setup with Radial Injection for Investigation of Transport and Deposition of Suspended Particles in Porous Media. Geotechnical Testing Journal,40(6). https://doi.org/10.1520/GTJ20160032.

19. Beisembetov, I.K., Abdeli, D.Zh., & Karabalin, U.S. (2018). Method for purification of industrial, waste, reservoir waters with suspended solid particles and biological microorganisms. (Patent No. 32696 RK MCI V11/00). Republic of Kazakhstan.

 

Visitors

7269736
Today
This Month
All days
244
40431
7269736

Guest Book

If you have questions, comments or suggestions, you can write them in our "Guest Book"

Registration data

ISSN (print) 2071-2227,
ISSN (online) 2223-2362.
Journal was registered by Ministry of Justice of Ukraine.
Registration number КВ No.17742-6592PR dated April 27, 2011.

Contacts

D.Yavornytskyi ave.,19, pavilion 3, room 24-а, Dnipro, 49005
Tel.: +38 (056) 746 32 79.
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
You are here: Home Archive by issue 2022 Content №2 2022 Treatment of formation water at oil fields using granular filters with varying particle sizes