- 1. Low-jitter reference-based synchronization for dual RF transmitters
- (Content №4 2026)
- ... W., Hong, X., Xiaohu, H., Yong, X., & Ling, S. (2010). A low-jitter RF PLL frequency synthesizer with high-speed mixed-signal down-scaling circuits. Journal of Semiconductors, 31(5). https://doi.org/10.1088/1674-4926/31/5/055008 ...
- Created on 24 August 2026
- 2. Intelligent control of in-wheel motors in a vehicle with analytical determination of torque distribution
- (Content №4 2026)
- ... the complexity of the control algorithms or the associated computational burden. Keywords: in-wheel motor, all-wheel-drive vehicle, vehicle speed, torque, regenerative braking References. 1. Dizqah, ...
- Created on 24 August 2026
- 3. Data-driven LSTM-based control to replace PID for unknown-model electric motor systems
- (Content №2 2026)
- ... motor speed regulation in systems with unknown or complex dynamics. Methodology. The proposed approach consists of three main stages: 1) operating the motor under a baseline PID controller and collecting ...
- Created on 25 April 2026
- 4. Justification of a rational scheme for configuring soil-treating machinery
- (Content №2 2026)
- ... and rotary speed. Biosystems Engineering, 118, 7-15. https://doi.org/10.1016/j.biosystemseng.2013.10.015 10. Mudarisov, S. G., Gabitov, I. I., Lobachevsky, Y. P., Mazitov, N. K., Rakhimov, R. S., ...
- Created on 25 April 2026
- 5. Integral approach to assessing energy losses during the motion of a traction vehicle with a hydro-mechanical transmission
- (Content №2 2026)
- ... power distribution between transmission branches, and internal power circulation effects. An integral indicator is introduced to evaluate energy losses over the operating speed range of the traction vehicle. ...
- Created on 25 April 2026
- 6. Model-based predictive control of the well drilling process
- (Content №2 2026)
- ... researched method of controlling a drilling rig based on an MPC controller involves the use of adjustable variables such as bit rotation speed (RPM), bit load (weight) (WOB), and pressure in the well cleaning ...
- Created on 25 April 2026
- 7. Substantiation of self-organization approaches in information networks to strengthen cyber resilience
- (Content №1 2026)
- ... 3(107), 159-172. https://doi.org/10.32620/reks.2023.3.13 26. Bannister, M. J., & Eppstein, D. (2012). Randomized speedup of the Bellman–Ford algorithm. Proceedings of the 2012 Meeting on Analytic ...
- Created on 27 February 2026
- 8. Neural network method for invariant recognition of vehicles in aerospace images
- (Content №1 2026)
- ... https://doi.org/10.48550/arXiv.1804.02767 18. Bochkovskiy, A., Wang, C. Y., & Liao, H. (2020). YOLOv4: Optimal Speed and Accuracy of Object Detection. arXiv:2004.10934. https://doi.org/10.48550/arXiv.2004.10934 ...
- Created on 27 February 2026
- 9. Assessment of the impact of natural and anthropogenic factors on the air quality of urbanised areas
- (Content №1 2026)
- ... territory of the city of Kyiv on basic meteorological indicators has been established. A negative correlation between the content of solid particles in the air and wind speed and wind gust speed has been ...
- Created on 27 February 2026
- 10. Solid-phase metallurgy in compressor blade manufacturing: effect of ultrasonic strengthening on surface layer properties
- (Content №1 2026)
- ... the intensive consolidation method – twist extrusion. Blade profile machining was performed by high-speed milling on a 5-axis machining centre. Ultrasonic treatment of specimen surfaces was conducted using ...
- Created on 27 February 2026
- 11. Simulation-driven assessment of cryptographic algorithms for resource-constrained infocommunication networks
- (Content №6 2025)
- ... 2.5 times faster than that required by the Kyber family. Computer experiments confirmed the existence of a trade-off between processing speed and security level. Symmetric algorithms are optimal for scenarios ...
- Created on 25 December 2025
- 12. Results of developing a laboratory testbench for remote control of a compressor installation based on WebHMI
- (Content №6 2025)
- ... 20. Nanmaran, R., Balasubramaniam, D., Senthil Kumar, P., Vickram, A. S., Saravanan, A., Thanigaivel, S., Srimathi, S., & Rangasamy, G. (2023). Compressor speed control design using PID controller ...
- Created on 25 December 2025
- 13. Elements overview and a commercial uav electric drive model
- (Content №6 2025)
- ... using the created simulation model. Transients for torque and speed were obtained and compared for two torque control algorithms. Originality. The developed “inertial” mathematical model of the electric ...
- Created on 25 December 2025
- 14. Improving accuracy of dual-purpose nylon parts fabricated by fused deposition modeling
- (Content №6 2025)
- ... of the FDM process and the dimensional accuracy of the resulting parts. The following parameters were analyzed: layer height, printing speed, extrusion temperature, bed temperature, extrusion multiplier, ...
- Created on 25 December 2025
- 15. Justification of coal mines conveyor line parameters
- (Content №6 2025)
- ... Justification of conveyor line parameters of a coal mine using initial data on the actual distribution of random freight traffic and taking into account the influence of the speed of transportation of ...
- Created on 25 December 2025
- 16. Model-based designof a cone crusher adaptive control system
- (Content №6 2025)
- ... standard deviation coefficients not exceeding 3.42 and 1.83 %, respectively. Originality. The regularity of the effect of the closed-side setting and the eccentric speed on the particle size distribution ...
- Created on 25 December 2025
- 17. Designing passenger vehicle diesel engine cams with enhanced dynamic characteristics
- (Content №6 2025)
- ... Findings. Tuning camshafts ensure the optimum supply of a full charge of the mixture to the cylinder by increasing the height and speed of valve lift. A notable characteristic of these camshafts is their ...
- Created on 25 December 2025
- 18. Increasing the efficiency of fine wet grinding of ore using the dynamic effect of ultrasound
- (Content №6 2025)
- ... which allows increasing the speed of passage of crushed ore particles through the screen and reducing the proportion of unclassified product. Practical value. The analysis of the results obtained shows ...
- Created on 25 December 2025
- 19. Paradigms of modeling and improving the reliability of data transmission in VLC technologies
- (Content №4 2025)
- ... (2003). High-speed integrated transceivers for optical wireless. IEEE Communications Magazine, 41, 58-62. https://doi.org/10.1109/MCOM.2003.1186546 12. Quintana, C., Guerra, V., Rufo, J., Rabadan, ...
- Created on 26 August 2025
- 20. Mathematical simulation of brushless high-speed permanent magnet motor
- (Content №4 2025)
- ... high-speed permanent magnet motor to estimate its parameters, characteristics and determine the magnitude of losses in the magnetic core under different control methods. Methodology. The finite element ...
- Created on 26 August 2025