Articles
Determination of granulometric composition of technogenic raw materials for producing composite fuel
- Details
- Category: Content №4 2022
- Last Updated on 29 August 2022
- Published on 29 August 2022
- Hits: 3519
Authors:
O.A.Haidai, orcid.org/0000-0003-0825-0023, Dnipro University of Technology, Dnipro, Ukraine, e‑mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
A.V.Pavlychenko, orcid.org/0000-0003-4652-9180, Dnipro University of Technology, Dnipro, Ukraine, e‑mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
A.S.Koveria, orcid.org/0000-0001-7840-1873, Dnipro University of Technology, Dnipro, Ukraine, e‑mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
V.V.Ruskykh, orcid.org/0000-0002-5615-2797, Dnipro University of Technology, Dnipro, Ukraine, e‑mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
T.V.Lampika, orcid.org/0000-0002-4840-6072, Public organization for the protection of public order Ecological Patrol, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2022, (4): 052 - 058
https://doi.org/10.33271/nvngu/2022-4/052
Abstract:
Purpose. To determine the granulometric composition of technogenic raw materials for agglomeration by the adhesive-chemical method. This approach allows for determining the optimal particle size distribution for obtaining the prepared agglomerated fuel, which has the form of cylindrical rods with a diameter of 30 mm and a length of 50200 mm.
Methodology. The granulometric composition of technogenic raw materials was determined using sieve and sedimentation analyses. 38 representative samples of carbon-containing raw materials were subjected to the investigation.
Findings. The sieve analysis results of representative samples of coal sludge and culms are presented; their graphical characteristics is given. Sieve analysis of the granulometric composition of samples of carbon-containing raw materials and sedimentation analysis of solid fuel samples with a fraction of fewer than 50 microns is carried out. It has been established that all samples with sizes of more than 56 mm should be subjected to further grinding.
Originality. For the first time, studies and comparative analysis of granulometric compositions of technogenic raw materials have been realized, which allows for a reasonable approach to obtaining composite fuel from carbon-containing wastes by the adhesive-chemical method, using various compositions of components.
Practical value. The results can process technogenic raw materials to get agglomerated fuel of specified parameters by the adhesive-chemical method and other processing areas, including using carbon-containing waste from various productions.
Keywords: granulometric composition, sieve analysis, sedimentation analysis, technogenic raw materials, culms, sludge, agglomerated fuel
References.
1. Ministry of Energy of Ukraine (2020). Information reference on the main indicators of development of the branches of the fuel and energy complex of Ukraine for December and 2020. Retrieved from http://mpe.kmu.gov.ua/minugol/control/uk/publish/article;jsessionid=CE77757E15DCC0D398F952BE1A0FC923.app1?art_id=245533545&cat_id=35081.
2. Verkhovna Rada of Ukraine. Legislation of Ukraine (2021). National Energy Efficiency Action Plan until 2030. Order of the Cabinet of Ministers of Ukraine from 29.12.2021 No. 1803-. Retrieved from https://zakon.rada.gov.ua/laws/show/1803-2021-%D1%80#Text.
3. Verkhovna Rada of Ukraine. Legislation of Ukraine (2022). On alternative energy sources. Law of Ukraine. Edited by 01.01.2022. Retrieved from https://zakon.rada.gov.ua/laws/show/555-15#Text.
4. Yasnolob, I.O., Bereznytskiy, E.V., & Radionova, Ya.V. (2020). Energy efficiency and energy independence as promising directions for the development of innovative energy saving systems. Ekonomika ta upravlinnya pidpryyemstvamy, 47, 143-146.
5. Fecko, P., & Tora, B. (2013). Coal waste: handling, pollution impacts and utilization. The Coal Handbook. Towards Cleaner Production, 63-84. https://doi.org/10.1533/9781782421177.1.63.
6. Dwivedi, K.K., Pramanick, A.K., Karmakar, M.K., & Chatterjee,P.K. (2021). Waste coal utilization: a potential way to convert waste to energy. In Handbook of Advanced Approaches Towards Pollution Prevention and Control. Legislative Measures and Sustainability for Pollution Prevention and Control, 2, (pp. 163-191). https://doi.org/10.1016/B978-0-12-822134-1.00006-3.
7. Kieush, L., Boyko, M., Koveria, A., Khudyakov, O., & Ruban, A. (2019). Utilization of the Prepyrolyzed Technical Hydrolysis Lignin as a Fuel for Iron Ore Sintering. Eastern-European Journal of Enterprise Technologies, 1/6(97), 84-89. https://doi.org/10.15587/1729-4061.2019.154082.
8. Dawid P. Hanak (2022). Environmental life-cycle assessment of waste-coal pellets production. Clean Energy, 6(1), 765-778. https://doi.org/10.1093/ce/zkab050.
9. Fedorova, Yu.I., & Chuprina, M.O. (2017). Problems and directions of waste utilization in Ukraine and the world (in Ukrainian). Aktualni problemy ekonomiky ta upravlinnya, 11. Retrieved from http://ape.fmm.kpi.ua/article/view/102732.
10. Kulytskiy, S. (2019). Coal industry of Ukraine: state and problems of development in the context of national security (in Ukrainian). Ukrayina: podiyi, fakty, komentari, 21, 62-74. Retrieved from http://nbuviap.gov.ua/index.php?option=com_content&view=article&id=4584:problemi-rozvitku-ukrajinskoji-vugilnoji-promislovosti&catid=8&Itemid=350.
11. Haidai, O.A. (2018). On the issue of the development of man-made deposits using the technology of production of composite fuel. Coal of Ukraine, (4-5), 27-29.
12. Pavlychenko, A.V., Haidai, O.A., Firsova, V.E., Russkikh, V.V., & Tkach, I.V. (2020). Technological directions of coal enrichment waste processing. Collection of Research papers of the National Mining University, 62, 139-148.
13. Pavlychenko, A.V., Haidai, O.A., Firsova, V.E., & Lampika,T.V. (2020). Optimization of physical and mechanical parameters of fuel products obtained from the processing of waste from the coal industry. Collection of Research papers of the National Mining University, 63, 88-97.
14. DSTU 4082-2002. Hard coal. Size analysis by sieving. Standard of Ukraine (2002). Retrieved from http://online.budstandart.com/ua/catalog/doc-page?id_doc=75811.
15. DIN 66116-1-73. Particle size analysis;sedimentation analysis in the gravitational field,sedimentation balance (1973). Germany.
16. Agimelen, S.O., Jawor-Baczynska, A., McGinty, J., Dziewierz,J., Tachtatzis, C., Cleary, A., , & Mulholland, A.J. (2016). Integration of in situ imaging and chord length distribution measurements for estimation of particle size and shape. Chemical Engineering Science, 144, 87-100. https://doi.org/10.1016/j.ces.2016.01.007.
17. Baranets, V.O., Kizilova, N.M., & Datsok, O.M. (2019). Hardware and software complex for the study of sedimentation processes in technical and biological suspensions of micro- and nanoparticles that aggregate (in Ukrainian). Journal of V.N.Karazin Kharkiv National University. Series Mathematical modeling. Information Technology. Automated control systems, 42, 4-11. https://doi.org/10.26565/2304-6201-2019-42-01.
18. DSTU 3472:2015. Brown coal, hard coal and anthracite. Classification. Standard of Ukraine (2015). Retrieved from http://online.budstandart.com/ua/catalog/doc-page?id_doc=61974.
19. Biletskiy, V.S., & Smirnov, V.O. (2013). Modelling of mineral beneficiation processes. Donetsk: Eastern Publishing House.
20. Biletskiy, V.S., & Sergeev, P.V. (2013). Utilization of coal beneficiation waste by briquetting. Mineral beneficiation, 53(94), 205-209.
Newer news items:
- Protection of information resources as an integral part of economic security of the enterprise - 29/08/2022 03:58
- Application of mathematical modelling methods in oil production management - 29/08/2022 03:58
- Accounting and analytical aspects of functioning of enterprises in the context of the introduction of an artificial intelligence system - 29/08/2022 03:58
- Prediction of changes in the vegetation cover of Ukraine due to climate warming - 29/08/2022 03:58
- Problematic issues of attracting criminal responsibility for the crimes against industrial safety - 29/08/2022 03:58
- Ecological estimation of installing geothermal systems on territories of closed coal mines - 29/08/2022 03:58
- Classification of heating conditions in terms of smart control of indoor heating with the use of uncontrolled electric heaters - 29/08/2022 03:58
- The electrical power quality indicator – interference power factor - 29/08/2022 03:58
- Simulation of the process of milling and grinding cylindrical surfaces by an oriented tool in one setup - 29/08/2022 03:58
- Synthesis of phosphosulphate substance and properties of its structured mixture with quartz sand - 29/08/2022 03:58
Older news items:
- Forceful interaction of the casing string with the walls of a curvilinear well - 29/08/2022 03:58
- Assessing the impact of underground working (tunneling) in the II section of Seam 14 on surface construction works at Ha Lam Coal Mine (Vietnam) - 29/08/2022 03:58
- Automation of ore quality management in quarries - 29/08/2022 03:58
- Numerical study of microwave impact on gas hydrate plugs in a pipeline - 29/08/2022 03:58
- The methods to calculate expediency of composite degassing pipelines - 29/08/2022 03:58
- Nanostructures of coal beds in the Sherubaynurinsky section of the Karaganda basin - 29/08/2022 03:58
- Seismic geotraverse "Granit" (Ukrainian part). Reanimation - 29/08/2022 03:58
- The use of brown coal in Ukraine to obtain water-soluble sorbents - 29/08/2022 03:58