Науковий вісник НГУ

Determination of the wear mechanism of the diamond tool matrix by analysis of wear particles

• 
• 

User Rating:  / 0

PoorBest 

Details

Category: Content №4 2025

Last Updated on 29 August 2025

Published on 29 August 2025

Hits: 3407

Authors:

O. P. Vynohradova*, orcid.org/0009-0004-2282-6679, V. Bakul Institute for Superhard Materials, NAS of Ukraine, Kyiv, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

V. V. Vapnichna, orcid.org/0000-0003-3938-4358, National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”, Kyiv, Ukraine,  e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

* Corresponding author e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

повний текст / full article

Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2025, (4): 055 - 062

https://doi.org/10.33271/nvngu/2025-4/055

Abstract:

Purpose. Determining the contact zone of microindentors from the rock side with the surface of a non-diamond element based on the Ni-Sn system (6 wt%) and in comparison with the contact zone of the specified microindentors with the surface of a similar bond of a diamond-containing element, under dynamic loading.

Methodology. To select the wear products of the experimental element material, made by resistive electro-sintering and the core of abrasive sandstone as a result of short-term contact between their surfaces, the tests were performed on a stand created on the basis of the screw-cutting lathe ДІП–200 according to the parameters of technological conditions that simulate the drilling process. The sludge suspension was selected and examined using a ZEISS EVO 50 XVP scanning electron microscope with an Oxford Instruments Ultim Max energy dispersive X-ray analyser. Also, the worn surface of the diamond-free element was subjected to microscopic examination using Lomo Metam R-1 microscopes with a Digital KOCOM CCD video camera and Bausch & Lomb, mod. Gemolite.

Findings. The result of the study involves the determination of the direct point of contact between the microindenter on the rock side and the surface of the non-diamond element in the wear particle. The point of direct contact of the specified counterbodies has the form of an elliptical groove, which is the epicenter of the formation of a system of microcracks. The morphometric identity of the wear particles of the studied element and the diamond tool bond indicates the similarity of one of the mechanisms of microindentation from the side of the rock.

Originality. Determination of one of the sources of damage to the working surface of the diamond tool element opens up prospects in the study of all stages of the bond wear mechanism depending on changes in its chemical composition or technological parameters of the tool use.

Practical value. Determination of the chemical and morphometric features of the wear particles of the diamond tool bond will allow assessing its wear resistance and developing wear resistance criteria, which is reflected in the saving of resources.

Keywords: rock, diamond tool, wear particle, brittle wear

References.

1. Swain, B., Bhuyan, S., Behera, R., Mohapatra, S., & Behera, A. (2020). Wear: A Serious Problem in Industry. In Patnaik, A., Singh, T., & Kukshal, V. (Eds). (2021). Tribology in Materials and Manufacturing ‒ Wear, Friction and Lubrication. IntechOpen. https://doi.org/10.5772/intechopen.94211

2. Isonkin, A., Ilnitskaia, H., & Tsysar, M. (2015). The effect of mechanical activation of the charge WC + Co + Cu by nanodiamonds on the structure and properties of the material of the matrix of drilling bits. Rock Destruction and Metal-Working Tools – Techniques and Technology of the ToolManufacture and applications, 18, 103-109. Retrieved from http://www.ism.kiev.ua/images/%D0%92%D1%8B%D0%BF%D1%83%D1%81%D0%BA%20%E2%84%96%2018.pdf

3. Isonkin, A. M. (2012). The formation of the relief of the working surface of the diamond drill bit. Rock Destruction and Metal-Working Tools –Techniques and Technology of the Tool Manufacture and applications, 15, 63-68.

4. Isonkin, A. (2010). The character and degree of the impact of sludge particles of destroyed rock on the matrix of diamond bit. Rock Destruction and Metal-Working Tools – Techniques and Technology of the Tool Manufacture and applications, 13, 182-187.

5. Isonkin, A., Osipov, A., & Matviichuk, А. (2021). Parameters of rock sludge during its destruction by diamond rock-destructive tool. Rock Destruction and Metal-Working Tools, Techniques and Technology of the Tool Manufacture and applications, 24, 45-56. https://doi.org/10.33839/2708-731Х-24-1-45-56

6. Isonkin, A., Ilnitskaya, G., Zaitseva, I., & Tkach, V. (2018). The nature of wear of synthetic diamonds of different strength in impregnated drill bits. Rock Destruction and Metal-Working Tools – Techniques and Technology of the Tool Manufacture and applications. 21, 54-63.

7. Xiaoxi, Z., Kaihua, Y., & Hui, Z. (2010). Chinese scientific drilling No 1 well diamonds coring bit technology. Rock Destruction and Metal-Working Tools, Techniques and Technology of the Tool Manufacture and applications 13, 14-19.

8. Naidich, Yu., Bugaiev, А., Ievdokimov, V., & Umansk, V. (2013). Development of the design and manufacturing technology of geological exploration drill bits equipped with diamond-hard alloy composite material (DHCCM) with adhesive fixation of diamonds. Rock Destruction and Metal-Working Tools –Techniques and Technology of the Tool Manufacture and applications, 16, 19-25.

9. Kuzei, A., Babich V., & Kudrichkiy, V. (2018). Influence of macrostructure of diamond-containing composite materials on cutting capacity of the tool. Rock Destruction and Metal-Working Tools – Techniques and Technology of the Tool Manufacture and applications. 21, 183-192.

10.      Lu P., & Chou, K. (2011). Micro-Scratch Testing and Simulations for Adhesion Characterizations of Diamond-coated Tools. Proceeding of 39 ^th Annual SME North American Manufacturing Research Conference (NAMRC39), (13/17June 2011). Corvallis, US: Oregon State University. Retrieved from https://www.researchgate.net/publication/268803441_Micro-Scratch_Testing_and_Simulations_for_Adhesion_Characterizations_of_Diamond-coated_Tools

11.      Li, M., Guo, X., Yuan, S., Zhao, B., Qi, Y., Zhang, S., Guo, D., & Zhou, P. (2022). An Analysis of the Effect of Abrasive/Tool Wear on the Ductile Machining of Fused Silica from the Perspective of Stress. Micromachines, 13(6). https://doi.org/10.3390/mi13060820

12.      Wang, W., Yao, P., Wang, J., Huang, C., Zou, B., Liu, H., & Yan, J. (2016). Crack-free ductile mode grinding of fused silica undercontrollable dry grinding conditions. International Journal of Machine Tools and Manufacture, 109, 126-136. https://doi.org/10.1016/j.ijmachtools.2016.07.004

13.      Wang, J., Jia, Z., & Guo, Y. (2018). Shape-cutting of quartz glass by spark discharge-assisted diamond wire sawing. Journal of Manufacturing Processes, 34, 131-139. https://doi.org/10.1016/j.jmapro.2018.06.001

14.      An, Q., Ming, W., & Chen, M. (2015). Experimental Investigation on cutting characteristics in nanometric plunge-cutting of BK7 and fused silica glasses. Materials, 8, 1428-1441. https://doi.org/10.3390/ma8041428

15.      Abdelkawy, A., Yoshino, M., & Nakagawa, Y. (2020). Effect of tool rake angle and crystal orientation on ductile mode cutting of hard/brittle materials. International Journal of Automation Technology, 14, 253-259. https://doi.org/10.20965/ijat.2020.p0253

16.      Liu, H., Xie, W., Sun, Y., Zhu, X., & Wang, M. (2018). Investigations on brittle-ductile cutting transition and crack formation in diamond cutting of mono-crystalline silicon. International Journal of Advanced Manufacturing Technology, 95, 317-326. https://doi.org/10.1007/s00170-017-1108-1

17.      Yin, J., Qian, B., Li, Y., & Zhang, B. (2018). Formation of subsurface cracks in silicon wafers by grinding. Nanotechnology and Precision Engineering, 172-179. https://doi.org/10.1016/j.npe.2018.09.003

18.      Pryimak, L., Dovhal, A., & Varijukhno, V. (2022). Wear resistance research of the new composition materials made of alumina intended for specific tribotechnical application. Superhard materials, 5, 39-47.

19.      Umansky, A., Dovgal, A., Kisel, V., & Yevdokimenko, Yu. (2012). Structure and wear patterns of coatings made of composite materials of the system (SiC-Fl2O3)-(NiAl).  Superhard Materials, 2, 49-57.

20.      Klimenko, S., Manokhin, A., & Kopeikina, M. (2015). The state of the surface layer of tools with PSTM on the basis of cBN during turning of hardened steel. Cutting and tool in technological systems, 85, 119-125.

21.      Lavrinenko, V. (2019). Diamond machining ceramics: influence of abrasive particle aspect of sludge. Rock Destruction and Metal-Working Tools – Techniques and Technology of the Tool Manufacture and applications, 22, 401-406.

22.      Vynohradova, О. (2011). On the issue of the mechanism of rock destruction by functional elements made of composite diamond-containing materials. Rock-destroying and metalworking tools ‒ the technique and technology of their manufacture and application. Rock Destruction and Metal-Working Tools – Techniques and Technology of the Tool Manufacture and applications, 14, 14-22.

23.      Vynohradova, O., Maуstrenko, А., Schmegerа, R., Manokhin, A., Ilnitska, G., Oliinyk, N., …, & Bologova, L. (2019). The analysis of products of wear of diamond -containing material. Rock Destruction and Metal-Working Tools – Techniques and Technology of the Tool Manufacture and applications, 22, 93-102. https://doi.org/10.33839/2223-3938-2019-22-1-93-102

24.      Vynohradova, О.,  Vasylchuk, O., Maystrenko, A., Zakora, A., Tkach, V., Vapnichna, V., …, &  Bologova, L. (2024). Investigation of the indenter penetration zone in the wear particle of the matrix of a diamond-containing rock-cutting tool. Materials Science, 60, 45-49. https://doi.org/10.1007/s11003-024-00849-9

25.      Khvorostyany, V. (2014). Mechanical behavior of ceramics and glass during localized fractures of sample edges by a Rockwell ­indenter. Problems of Strength, 3, 106-115. ISSN 0556-171.

26.      Vynohradova, O., Maystrenko, A., Vasylchuk, O., Zakora, A. P., Bologova, L., Tkach, V., Petasyuk, G., & Bilorusets, V. (2024). Method for determining the intensity of wear of rock-crushing and stone-working tools by the degree of damage to their working surface. (Patent of Ukraine No. 156483). V. M. Bakul Institute of Superhard Materials of the National Academy of Sciences of Ukraine (UA).

27.      Danilchenko, L., & Bobryk, V. (2016). Determination of factors influencing deformation resistance in the process of hot deformation of sheet materials. Materials of the 19 ^th scientific conference of I. Pulyuy, TNTU, 36-37. Retrieved from https://elartu.tntu.edu.ua/bitstream/123456789/17370/2/Conf_2016_Danylchenko_L-Determining_factors_impact_36-37.pdf

28.      Shmegera, R., Kushch, V., & Maystrenko, A. (2014). Metallic bond based on nickel and intensive electrosintering of diamond-containing composites. Superhard Materials, 6, 44-53.

29.      Vasylchuk, A., Maystrenko, A., Petasyuk, G., Vynohradova, E., Ilnitska, G., Oleinyk, N., …, & Manohin, A. (2021). Wear of Diamond Composite Materials during Rock Destruction. Journal of Friction and Wear, 42(6), 454-460. https://doi.org/10.3103/S1068366621060131

30.      Vynohradova, O. P., Vasylchuk, O. S., Zakora, A. P., Peta­syuk, G. A., & Garashchenko, V. V. (2021). The analysis of nature of damage of the matrix material used in production of diamond drilling and stone working tools during destraction of rocks. Energy-and resorce-saving technologies of developing the raw-material base of mining regions. Petrosani: UNIVERSITAS. https://doi.org/10.31713/M1021

• < Prev
• Next >