- 1. Prognostic modelling of structural block size distribution in the rock mass
- (Content №1 2026)
- ... M. B., Muzyka, I. O., Pysmennyi, S. V., & Kalinichenko, O. V. (2019). Determination of drilling and blasting parameters considering the stress-strain state of rock ores. Naukovyi Visnyk Natsionalnoho ...
- Created on 27 February 2026
- 2. Solid-phase metallurgy in compressor blade manufacturing: effect of ultrasonic strengthening on surface layer properties
- (Content №1 2026)
- ... For the first time, quantitative relationships have been established between ultrasonic strengthening parameters with steel balls and the stress-strain state, microhardness, roughness, and work-hardening ...
- Created on 27 February 2026
- 3. Geomechanical principles and specifics of modeling a complex method for de-stressing gas-dynamically active rock massif
- (Content №1 2026)
- ... approaches. Computational modeling using the finite element method was performed to analyze the stress-strain state of the rock mass. Vertical and horizontal stresses, stress intensity, and their distribution ...
- Created on 27 February 2026
- 4. Ensuring the stability of slopes and ledges at the Vasilkovsky quarry (Republic of Kazakhstan)
- (Content №6 2025)
- ... to assessing the stability of the sides and ledges at the Vasilkovsky quarry based on the integration of numerical modeling of the stress-strain state and spatial analysis of the rock mass fracturing. ...
- Created on 25 December 2025
- 5. Assessment of the fatigue strength of a tank wagon car boiler taking into account corrosive wear
- (Content №5 2025)
- Authors: O. V. Fomin*, orcid.org/0000-0003-2387-9946, National Transport University, Kyiv, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it. I. V. Shcherbyna, orcid.org/0000-0002-9574-2757, National Transport University, ...
- Created on 25 October 2025
- 6. DECARBUST: decarbonization and dust technologies for sustainable mining operations
- (Content №5 2025)
- ... V. P., Tkachuk, V. V., Aniskov, O. V., & Kliatskyi, O. V. (2025). Investigation of the stress-strain state of mine shaft support under long-term operation. Naukovyi Visnyk Natsionalnoho Hirnychoho ...
- Created on 25 October 2025
- 7. Analysis of a soil slope stability based on modified failure criterion
- (Content №4 2025)
- ... finite element modeling of the stress-strain state of the soil slope, and correlation analysis of factors influencing slope stability. Findings. The mechanical properties of loam and sandy loam soils ...
- Created on 26 August 2025
- 8. Green technologies in the design of single-storey frameworks
- (Content №3 2025)
- ... of the equipment compartment frame covering, stress-strain state patterns, as well as natural frequency spectra and vibration modes, were obtained. The structural variant of the frame recommended for practical ...
- Created on 25 June 2025
- 9. Substantiation of rational parameters for composite support in mine workings
- (Content №3 2025)
- ... and their positioning – factors significantly influencing the operational characteristics of the support. The results of stress-strain state (SSS) modeling of the improved support system allowed for the ...
- Created on 25 June 2025
- 10. Investigation of the stress-strain state of mine shaft support under long-term operation
- (Content №2 2025)
- ... to assessing the stress-strain state of a mine shaft using frequency-spatial analysis of NPEMFE signals has been proposed, enabling the detection of not only high-stress zones but also areas of potential ...
- Created on 26 April 2025
- 11. Providing stability of quarry slopes at combined mining of mineral deposits
- (Content №2 2025)
- ... and assess the impact of geotechnical factors. The Examine2D software was used to model stress and deformation distribution within the rock mass. Findings. A zoning scheme of the stress-strain state ...
- Created on 26 April 2025
- 12. Analysis of the strength of the composite module of the body wagon-coal truck
- (Content №6 2024)
- ... to determine graphical representations of stress-strain states; to check fatigue strength by computer simulation method. Findings. A computer model was developed with the help of a modern computing software ...
- Created on 28 December 2024
- 13. Strength analysis of the model 918 wagon under non-typical bulk loads
- (Content №4 2024)
- ... obtained with its help; application of non-typical design loads; obtaining and analyzing pictures of stress-strain states by the finite element method. Findings. A 3D model of the body module of the ...
- Created on 28 August 2024
- 14. Influence of rock shear processes on the methane content of longwall faces
- (Content №4 2024)
- ... 17. Imashev, A., Suimbayeva, A., Zhunusbekova, G., Zeitinova, Sh., Kuttybayev, A., & Mussin, A. (2022). Research into stress-strain state of the mass under open pit with a change in the open-pit ...
- Created on 28 August 2024
- 15. Endurance calculation of welded joints in tubbing erector mechanism using digital methods
- (Content №3 2024)
- ... approaches to determining the influence of loads and experimental methods. In particular, the finite element method (FEM) is used when modeling the stress-strain state in welded joints to identify stress ...
- Created on 28 June 2024
- 16. Assessment of the state of the rock mass around the crosscuts under additional deformation disturbances
- (Content №2 2024)
- ... the research objects has been developed. Rational parameters of the technology for working out pillars are substantiated, under which the stress-strain state of the geomechanical system can be safely controlled. ...
- Created on 01 May 2024
- 17. Assessment of the influence of the surface layer of coals on gas-dynamic phenomena in the coal seam
- (Content №2 2024)
- ... nanolayer, determination of the role of stress-strain state of the seam in the formation of fine coal and methane at their emissions into the mine workings. Methodology. Mathematical and experimental ...
- Created on 01 May 2024
- 18. A methodological approach to assessing the durability of welded structures of screens using SolidWorks Simulation software
- (Content №6 2023)
- ... of a gap between the welded elements. The stress-strain state analysis of welded constructions using the Finite Element Method has revealed that when the computational mesh cell size is reduced, the stress ...
- Created on 23 December 2023
- 19. Analysis and prediction of surface settlements during the digging of underground mining works (Algeria)
- (Content №6 2023)
- ... P. E. (2022). Prediction of the stress-strain state and stability of the front of tunnel face at the intersection of disturbed zones of the soil mass. Journal of Mining Institute, 254, 252-260. https://doi.org/10.31897/PMI.2022.26. ...
- Created on 23 December 2023
- 20. Mathematical substantiation and creation of information tools for optimal control of drilling and blasting in open-pit mine
- (Content №6 2023)
- ... stress-strain state of the belt in the operating changes of the burdening conveyor parameters. In New Developments in Mining Engineering 2015: Theoretical and Practical Solutions of Mineral Resources Mining, ...
- Created on 23 December 2023