- 1. Improving accuracy of dual-purpose nylon parts fabricated by fused deposition modeling
- (Content №6 2025)
- ... 9. Jia, Y., He, H., Peng, X., Meng, S., Chen, J., & Geng, Y. (2017). Preparation of a new filament based on polyamide-6 for three-dimensional printing. Polymer Engineering & Science, 57(12), ...
- Created on 25 December 2025
- 2. Minimizing the impact of motor vehicles on the environment and the health of the population of agglomerations
- (Content №5 2025)
- ... of nitrogen oxides in diesel engine emissions. Along with the use of a bio-component in diesel fuel, it is proposed to use biopolymer solutions based on starch or lignin and micro-green barriers in the ...
- Created on 25 October 2025
- 3. Assessment of the fatigue strength of a tank wagon car boiler taking into account corrosive wear
- (Content №5 2025)
- ... A. (2021). Effects of the temperature–time regime of curing of composite patch on repair process efficiency. Polymers, 13(24), 4342. https://doi.org/10.3390/polym13244342 18. Kondratiev, А. V., ...
- Created on 25 October 2025
- 4. Assessment of reservoir filtration-capacity properties and saturation at the Morskoye field
- (Content №3 2025)
- ... based on GIS. Petroleum Geoscience, 24(1), 131-141. https://doi.org/10.1144/petgeo2016-100 26. Khattab, H., Hamdy, A., El-Hoshoudy, A. N., & Gomaa, S. (2024). Assessment of biopolymers rheological ...
- Created on 25 June 2025
- 5. Effect of heat treatment on the mechanical properties of nylon parts in additive manufacturing
- (Content №2 2025)
- ... 123, 104764. https://doi.org/10.1016/j.jmbbm.2021.104764 12. Khosravani, M. R., Schüürmann, J., Berto, F., & Reinicke, T. (2021). On the post-processing of 3d-printed abs parts. Polymers, 13(10), ...
- Created on 26 April 2025
- 6. Testing of fine classification sifter in the processing and disposal of mining waste
- (Content №2 2025)
- ... https://doi.org/10.1088/1755-1315/1254/1/012002 22. Krupnik, L., Yelemessov, K., Beisenov, B., & Baskanbayeva, D. (2020). Substantiation and process design to manufacture polymer-concrete transfer ...
- Created on 26 April 2025
- 7. Feasibility assessment of low-grade iron ore from El Ouenza mine by high-intensity magnetic separation
- (Content №1 2025)
- ... T. M., & Silva, G. J. B. (2023). Proposition of geopolymers obtained through the acid activation of iron ore tailings with phosphoric acid. Construction and Building Materials, 403, 133078. https://doi.org/10.1016/j.conbuildmat.2023.133078. ...
- Created on 25 February 2025
- 8. Analysis of the strength of the composite module of the body wagon-coal truck
- (Content №6 2024)
- ... 1. Kondratiev, A., & Slivinsky, M. (2018). Method for determining the thickness of a binder layer at its non-uniform mass transfer inside the channel of a honeycomb filler made from polymeric paper. ...
- Created on 28 December 2024
- 9. Quantum mechanical model of interaction of charges of metal atoms during creation of chrome coatings
- (Content №6 2024)
- ... and their hybrids for various applications: A review. Polymers, 13(14), 2322. https://doi.org/10.3390/polym13142322. 16. Sobolev, V. V., Bilan, N. V., Baskevich, O. S., & Stefanovich, I. I. (2018). ...
- Created on 28 December 2024
- 10. On the issue of load’s external ballistics under low-speed transportation
- (Content №4 2024)
- ... of Basalt Powder on the Properties of Foamed Geopolymers. Materials, 17(10), 21. https://doi.org/10.3390/ma17102336. ...
- Created on 28 August 2024
- 11. The effect of petroleum products pollution on environmental soil condition at airport adjacent territory
- (Content №4 2024)
- ... which are characterize petroleum products used for refueling and operating vehicles, there are products of decomposition and aging of polymers, components of additives. The dependence of the ecological ...
- Created on 28 August 2024
- 12. Strength analysis of the model 918 wagon under non-typical bulk loads
- (Content №4 2024)
- ... 24. Kondratiev, A., & Slivinsky, M. (2018). Method for determining the thickness of a binder layer at its non-uniform mass transfer inside the channel of a honeycomb filler made from polymeric paper. ...
- Created on 28 August 2024
- 13. Enhanced oil recovery of deposits by maintaining a rational reservoir pressure
- (Content №4 2024)
- ... and poymar flooding. Journal of Petroleum Exploration and Production Technology, 2, 67-74. https://doi.org/10.1007/s13202-012-0021-2. 5. Gao, C., Shi, J., & Zhao, F. (2014). Successful polymer flooding ...
- Created on 28 August 2024
- 14. Antioxidant properties of brown coal humic substances
- (Content №3 2024)
- ... of the developed methods are shown. Practical value. The green-chemistry related development and application of drugs based on native and modified humic substances as polymers with adjustable redox properties ...
- Created on 28 June 2024
- 15. Effect of hardened cement waste and fresh cement in the treatment of expansive soil
- (Content №3 2024)
- ... 9. Santhikala, R., Chandramouli, K., & Pannirselvam, N. (2022). Stabilization of expansive soil using flyash based geo-polymer. Materials Today: Proceedings, 68, 110-114. https://doi.org/10.1016/j.matpr.2022.07.006. ...
- Created on 28 June 2024
- 16. Influence of relaxation on filtering microflows under harmonic action on the layer
- (Content №2 2024)
- ... velocity fields References. 1. Doroshenko,V. M., Prokopiv,V. Y., Rudyi, M. I., & Shcherbiy, R. B. (2013). Prior to the introduction of polymer watering in oil fields of Ukraine. Oil & gas industry ...
- Created on 01 May 2024
- 17. Shaping sustainable strategies of freight forwarding companies in the environment of the road transport market
- (Content №5 2023)
- ... S. K., Harangozó, D., & Fischer, S. (2022). Investigation of deformations of a lithium polymer cell using the Digital Image Correlation Method (DICM). Reports in Mechanical Engineering, 3(1), 116-134. ...
- Created on 27 October 2023
- 18. Research on an eco-safe filtration plant for wastewater treatment made of natural raw materials
- (Content №5 2023)
- ... out using mathematical and computer software. Findings. An environmentally safe filtration plant (containing sand, fallen leaves of linden, poplar, and plastic residues separated by a polymer mesh) was ...
- Created on 27 October 2023
- 19. Influence of drilling mud pulsations on well cleanout efficiency
- (Content №5 2023)
- ... (2016). Biopolymer-silicate drilling fluid for drilling horizontal wells. Prospecting and Development of Oil and Gas Fields, 4(61), 34-42. Retrieved from https://rrngr.nung.edu.ua/index.php/rrngr/article/view/181/158. ...
- Created on 27 October 2023
- 20. Soil contamination status using contamination indicators and the health risk
- (Content №4 2023)
- ... A. H., & Zainal, Z. (2022). Nanomaterials for the Treatment of Heavy Metal Contaminated Water. Polymers, 14(3), 583. https://doi.org/10.3390/polym14030583. 41. Lin, H., Wang, Z., Liu, C., & Dong, ...
- Created on 28 August 2023