- 1. Assessment of the fatigue strength of a tank wagon car boiler taking into account corrosive wear
- (Content №5 2025)
- ... changes in fatigue safety factors in the most stressed areas of a tank car boiler and the appearance and development of corrosion defects. The findings demonstrate the critical importance of the metal ...
- Created on 25 October 2025
- 2. Paradigms of modeling and improving the reliability of data transmission in VLC technologies
- (Content №4 2025)
- ... of false and undetected defects. The key factors of stability are metrological support, control accuracy and reduction of design risks. The proposed models allow improving the systemic quality of design ...
- Created on 26 August 2025
- 3. Assessing criteria for casting and deformation suitability of metals and alloys
- (Content №1 2025)
- ... of installation of pressing of pipes. System technologies, 2(67), 126-145. 10. Wang, Y., & Li, J. (2010). Phase field modeling of defects and deformation. Acta Materialia, 58(4), 1212-1235. https://doi.org/10.1016/j.actamat.2009.10.041. ...
- Created on 25 February 2025
- 4. Strength analysis of the model 918 wagon under non-typical bulk loads
- (Content №4 2024)
- ... 15. Rudavsʹkyy, D., Shefer, M., Kanyuk, Yu., Shpak, Z., & Ripak, N. (2021). Calculation model for the evaluation of tired defect development in the freight wagon side frame. Ukrainian Journal of ...
- Created on 28 August 2024
- 5. Combined roasting and leaching treatment for reducing phosphorus, aluminum and silicon in oolitic iron ore
- (Content №4 2024)
- ... & Kim, H.-j. (2021). Surface morphology evolution and underlying defects in homoepitaxial growth of GaAs (110). Journal of Alloys and Compounds, 874, 159848. https://doi.org/10.1016/j.jallcom.2021.159848. ...
- Created on 28 August 2024
- 6. Cable line equivalent circuit parameters determination using the instantaneous power components
- (Content №2 2024)
- ... https://doi.org/10.1109/INCET51464.2021.9456334. 2. Lan, X., Zhou, N., Liu, M., Sun, T., Wang, J., & Wang, Q. (2021). Identification of defects in HV cable sheath based on equivalent impedance spectrum ...
- Created on 01 May 2024
- 7. Influence of ice structure on vitability of frozen sand-water and sand-clay mixtures
- (Content №1 2024)
- ... 16. Hoshiyama, Y., Nakashima, K., & Matsumoto, H. (2020). Simultaneous fabrication of multiple castings using frozen mold casting method. Defect and Diffusion Forum Submitted, 405, 75-79. https://doi.org/10.4028/www.scientific.net/DDF.405.75. ...
- Created on 29 February 2024
- 8. Improvement of the methodology for calculating the expected drilling speed with PDC chisels
- (Content №1 2024)
- ... 10(1), 1-8. https://doi.org/10.15407/mining10.01.001. 9. Vytyaz, O., Hrabovskyy, R., Artym, V., & Tyrlych, V. (2020). Effect of geometry of internal crack-like defects on assessing trouble-free operation ...
- Created on 29 February 2024
- 9. Recycling of barite ore tailings into porcelain: microstructure and dielectric properties
- (Content №6 2023)
- ... Deng, J., Sun, X., Liu, S., Liu, L., Yan, T., Fang, L., & Elouadi, B. (2016). Influence of interface point defect on the dielectric properties of Y doped CaCu3Ti4O12 ceramics. Journal of advanced dielectrics, ...
- Created on 23 December 2023
- 10. Modeling of drilling water supply wells with airlift reverse flush agent circulation
- (Content №1 2023)
- ... (2020). Effect of geometry of internal crack-like defects on assessing trouble-free operation of long-term operated pipes of drill string. Metallofizika i Noveishie Tekhnologii, 42(12), 1715-1527. https://doi.org/10.15407/mfint.42.12.1715. ...
- Created on 25 February 2023
- 11. Impact of weak electromagnetic fields on the properties of coal substance
- (Content №5 2022)
- ... usage of magnetically field effects in the form of basic tools for the research on structural defects. The results obtained will be a scientific ground for the development of methods for estimating the ...
- Created on 30 October 2022
- 12. Increased heavy metal concentrations in the soils near electric power generators in Samarra city (Iraq)
- (Content №3 2022)
- ... Lake on the Physical and Chemical Properties for Groundwater in Samarra City. Defect and Diffusion Forum, (398), 173-178. https://doi.org/10.4028/www.scientific.net/DDF.398.173. ...
- Created on 29 June 2022
- 13. Impact of stress concentration on reliability of metal structure elements of gantry cranes
- (Content №3 2022)
- ... existing ones. The obtained results provide an opportunity to assess the accumulated damage in the elements of the metal structure, to predict the development of defects to a critical size, as well as ...
- Created on 29 June 2022
- 14. Mineralogical and granulo-chemical characterization of veins 4 and 10, of Ain Mimoun baryte ore mine
- (Content №3 2022)
- ... 10. Manam, J., & Das, S. (2009). Thermally stimulated luminescence studies of undoped, Cu and Mn doped BaSO4 compounds. Radiation Effects and Defects in Solids, 163(12), 955-965. https://doi.org/10.1080/10420150802163869. ...
- Created on 29 June 2022
- 15. Lubricants for rail transport liquid (plastic) for friction pair “wheel – rail”
- (Content №1 2022)
- ... Voronin, S.,Skoryk, .,Stefanov, V., Onopreychuk, D., &Korostelov, Y. (2017). Study of the predominant defect development in rails of underground systems after preventive grinding and lubrication. MATEC ...
- Created on 25 February 2022
- 16. Sand-sodium-silicate mixtures structured in steam-microwave environment effective values of thermo-physical properties
- (Content №6 2021)
- ... accuracy, forecast level and residual stresses sign in them, shrinkage defects locations. This will reduce casting technology developing time and costs and castings manufacturability. Keywords: sand-sodium-silicate ...
- Created on 29 December 2021
- 17. New methods for preventing crumbling and collapse of the borehole walls
- (Content №4 2021)
- ... defects. Metallofizika i Noveishie Tekhnologii, 42(1), 69-76. https://doi.org/10.15407/mfint.42.01.0069. 9. Pryhorovska, T., & Ropyak, L. (2019). Machining Error Influnce on Stress State of Conical ...
- Created on 23 August 2021
- 18. The method for determining the parameters of the diagrams of a truncated-wedge destruction of cylindrical samples of rocks
- (Content №1 2021)
- ... v gornykh porodakh i vyrabotkakh, 108-112. 9. Trofimov, V.A., & Filippov, Yu.A. (2015). Deformation and destruction of materials with defects and dynamic phenomena in rocks and mining. Deformirovaniye ...
- Created on 05 March 2021
- 19. Statement of optimization tasks for the process of developing normative documents for gas infrastructure
- (Contens №4 2020)
- ... and Gas, 2(45), 41-47. 8. Kuliczkowska, E. (2015). Analysis of defects with a proposal of the method of establishing structural failure probability categories for concrete sewers. Archives of Civil ...
- Created on 30 August 2020
- 20. Influence of mechanical and thermal treatments on microstructural transformations in cast irons and properties of synthesized diamond crystals
- (Contens №4 2020)
- ... Defect redistribution in the crystal structure of the metal matrix and graphite inclusions plays a certain role at the mesoscale. It has been found that saturation with microstructural defects brings higher ...
- Created on 30 August 2020