Науковий вісник НГУ

Testing of fine classification sifter in the processing and disposal of mining waste

• 
• 

User Rating:  / 0

PoorBest 

Details

Category: Content №2 2025

Last Updated on 26 April 2025

Published on 30 November -0001

Hits: 1727

Authors:

O.Vasylchuk*, orcid.org/0000-0002-5467-3222, National University of Water and Environmental Engineering, Rivne, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

D.Lozin, orcid.org/0009-0006-0139-3944, Scientific and Manufacturing Company “PRODECOLOGIA”, Rivne, Ukraine

V.Zaiets, orcid.org/0000-0003-0659-7402, National University of Water and Environmental Engineering, Rivne, Ukraine

M.Kucheruk, orcid.org/0000-0002-0443-9139, National University of Water and Environmental Engineering, Rivne, Ukraine

V.Korniienko, orcid.org/0009-0007-5226-4752, University of Comenius, Bratislava, Slovak Republic

* Corresponding author e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

повний текст / full article

Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2025, (2): 096 - 105

https://doi.org/10.33271/nvngu/2025-2/096

Abstract:

Purpose. To study the efficiency of fine classification in the processes of enrichment and disposal of industrial waste and to implement modern equipment for improving material separation efficiency in mining industry.

Methodology. Experimental research was conducted at industrial facilities in Ukraine, specifically at the laboratories of Chervonohradska CEF (Lviv region), PJSC “Rafalivskyi Quarry,” and LLC “KKNK TECHNOBUD” (Rivne region). The experiments utilized a sieve with direct excitation operating in intensive vibration mode. The classification efficiency of materials of different fractions was studied under dry, wet, and pulp conditions. The integration of fine classification with auxiliary equipment, such as hydrocyclones and magnetic separators, was explored to simulate complete industrial circuits, providing insights into the potential for scaling these technologies to industrial applications.

Findings. The research showed that fine classification using a sieve with direct excitation achieved a separation efficiency of over 90 %. For particles larger than 100 µm, an efficiency of 75–85 % was achieved, while particles in the +40–100 m range reached 65–70 %. The final moisture content of the materials amounted to 18 % on an absolute scale. The developed technologies can be integrated into enrichment schemes for the second magnetic separation stage and other processes.

Originality. For the first time, the efficiency of fine classification using a sieve with direct excitation in waste enrichment processes of the mining industry has been theoretically substantiated and experimentally confirmed. Optimal vibration mode parameters have been established to ensure high separation efficiency for particles up to 50 m. The application of the technology in closed grinding circuits and before magnetic separation has been proposed.

Practical value. A fine classification technology using a direct excitation vibration mode has been developed and tested, providing a high fine fraction material separation level. The proposed technology enhances the efficiency of processing mining waste, ensuring more rational resource utilization by reducing waste volumes.

Keywords: fine classification, sieve with direct excitation, industrial waste, magnetic separation, vibration modes

References.

1. Korniyenko, V., Malanchuk, Ye., Zaiets, V., Koziar, M., Vasylchuk, O., & Sobczyk, W. (2024). Modeling the Impact of Hydraulic Fracturing of Amber-Bearing Rocks by a Flooded Jet in the Erosion Chamber on Mining Productivity. Inżynieria Mineralna, 2(1), 163-174. https://doi.org/10.29227/IM-2024-01-105

2. Malanchuk, Z. R., Moshynskyi, V. S., Lozynskyi, V. H., Korniienko, V. Ya., & Soroka, V. S. (2023). Determination of technological parameters for hydromechanical amber extraction in the Polissia region of Ukraine. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (3), 27-34. https://doi.org/10.33271/nvngu/2024-3/027

3. Bazaluk, O., Petlovanyi, M., Zubko, S., Lozynskyi, V., & Sai, K. (2021). Instability Assessment of Hanging Wall Rocks during Underground Mining of Iron Ores. Minerals, 11(8), 858. https://doi.org/10.3390/min11080858

4. Rysbekov, K. B., Toktarov, A. A., & Kalybekov, T. (2021). Technique for Justifying the Amount of the Redundant Developed Reserves Considering the Content of Metal in the Mining Ore. IOP Conference Series: Earth and Environmental Science, 666(3), 032076. https://doi.org/10.1088/1755-1315/666/3/032076

5. Serdaliyev, Y., Iskakov, Y., & Alibayev, A. (2024). Control of blast parameters for high-quality breaking of thin slope ore bodies. Mining of Mineral Deposits, 18(2), 49-59. https://doi.org/10.33271/mining18.02.049

6. Abuova, R. Z., Suleyev, D. K., & Burshukova, G. A. (2022). Study of damping properties of alloyed steels with ceramic-metallic nanostructured coating for critical parts. News of the National Academy of Sciences of the Republic of Kazakhstan, Series of Geology and Technical Sciences, 3(453), 52-65. https://doi.org/10.32014/2022.2518-170X.179

7. Malanchuk, Y., Moshynskyi, V., Khrystyuk, A., Malanchuk, Z., Korniyenko, V., & Zhomyruk, R. (2024). Modelling mineral reserve assessment using discrete kriging methods. Mining of Mineral Deposits, 18(1), 89-98. https://doi.org/10.33271/mining18.01.089

8. Malanchuk, Z. R., Korniyenko, V. Y., Zaiets, V. V., Vasylchuk, O. Y., Kucheruk, M. O., & Semeniuk, V. V. (2023). Study of hydroerosion process parameters of zeolite-smectite tuffs and underlying rock. IOP Conference Series: Earth and Environmental Science, 1254(1), 012051. https://doi.org/10.1088/1755-1315/1254/1/012051

9. Bazaluk, O., Slabyi, O., Vekeryk, V., Velychkovych, A., Ropyak, L., & Lozynskyi, V. (2021). A Technology of Hydrocarbon Fluid Production Intensification by Productive Stratum Drainage Zone Reaming. Energies, 14(12), 3514. https://doi.org/10.3390/en14123514

10.      Serdaliyev, Y., Iskakov, Y., Bakhramov, B., & Amanzholov, D. (2022). Research into the influence of the thin ore body occurrence elements and stope parameters on loss and dilution values. Mining of Mineral Deposits, 16(4), 56-64. https://doi.org/10.33271/mining16.04.056

11.      Shevchenko, V., Shevchenko, G., & Lebed, G. (2016). Recommended practice for using resource-saving technologies and tools for fine classification of uranium ores by size and refuse dehydration. Rozrobka Rodovyshch, 10(1), 69-76. https://doi.org/10.15407/mining10.01.069

12.      Malanchuk, Z., Moshynskyi, V., Malanchuk, Ye., Korniyenko, V., Vasylchuk, O., Zaiets, V., & Kucheruk, M. (2023). Impact by the operating and structural parameters of a screen on the technological parameters of vibratory basalt sieving. Mining of Mineral Deposits, 17(2), 35-43. https://doi.org/10.33271/mining17.02.035

13.      Chepushtanova, T. A., Yulussov, S. B., Baigenzhenov, O. S., Khabiyev, A. T., Merkibayev, Y. S., & Mishra, B. (2023). Technology of smelting complex alloys using high-ash coals and modeling of the possibilities of their application in the production of steel and ferroalloys. Engineering Journal of Satbayev University, 145(4), 5-9. https://doi.org/10.51301/ejsu.2023.i4.01

14.      Saik, P., Rysbekov, K., Kassymkanova, K. K., Lozynskyi, V., Kyrgizbayeva, G., Moldabayev, S., Babets, D., & Salkynov, A. (2024). Investigation of the rock mass state in the near-wall part of the quarry and its stability management. Frontiers in Earth Science, (12), 1395418. https://doi.org/10.3389/feart.2024.1395418

15.      Malanchuk, Z. R., Khrystyuk, A. O., Stets, S. Ye., Semeniuk, V. V., & Malanchuk, L. O. (2022). Substantiation of research results on energy efficiency of basalt crushing. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (6), 41-46. https://doi.org/10.33271/nvngu/2022-6/041

16.      Bagova, Z. I., Turebekova, G. Z., Rodrigo-Ilarri, J., Kolesnikov, A. S., & Kozykeyeva, R. A. (2023). Investigation of plumbum-containing slags and ways for their reclaiming. Engineering Journal of Satbayev University, 145(5), 25-30. https://doi.org/10.51301/ejsu.2023.i5.04

17.      Korniienko, V., Malanchuk, Y., Semeniuk, V., & Kucheruk, M. (2023). Research of the dehydration process of amber-containing mining mass. Inżynieria Mineralna, (1), 35-43. https://doi.org/10.29227/IM-2023-01-01

18.      Lozynskyi, V., Yussupov, K., Rysbekov, K., Rustemov, S., & Bazaluk, O. (2024). Using sectional blasting to improve the efficiency of making cut cavities in underground mine workings. Frontiers in Earth Science, 12, 1366901. https://doi.org/10.3389/feart.2024.1366901

19.      Kelamanov, B. S., Yessengaliyev, D. A., Burumbayev, A. G., Kabylkanov, S. K., & Samuratov, E. K. (2023). Technology of smelting complex alloys using high-ash coals and modeling of the possibilities of their application in the production of steel and ferroalloys. Engineering Journal of Satbayev University, 145(4), 5-9. https://doi.org/10.51301/ejsu.2023.i4.01

20.      Kuandykov, T. A., Karmanov, T. D., Kuldeyev, E. I., Yelemessov, K. K., & Kaliev, B. Z. (2022). New technology of uncover the ore horizon by the method of in-situ leaching for uranium mining. News of the National Academy of Sciences of the Republic of Kazakhstan, Series of Geology and Technical Science, (3), 142-154. https://doi.org/10.32014/2022.2518-170X.186

21.      Yelemessov, K. K., Baskanbayeva, D. D., Sabirova, L. B., & Akhmetova, S. D. (2023). Justification of an acceptable modern energy-efficient method of obtaining sodium silicate for production in Kazakhstan. IOP Conference Series: Earth and Environmental Science, 1254(1), 012002. https://doi.org/10.1088/1755-1315/1254/1/012002

22.      Krupnik, L., Yelemessov, K., Beisenov, B., & Baskanbayeva, D. (2020). Substantiation and process design to manufacture polymer-concrete transfer cases for mining machines. Mining of Mineral Deposits, 14(2), 103-109. https://doi.org/10.33271/mining14.02.103

23.      Serdaliyev, Y., Iskakov, Y., & Amanzholov, D. (2023). Selection of the optimal composition and analysis of the detonating characteristics of low-density mixed explosives applied to break thin ore bodies. ­Mining of Mineral Deposits, 17(4), 53-60. https://doi.org/10.33271/mining17.04.053

24.      Bazaluk, O., Anisimov, O., Saik, P., Lozynskyi, V., Akimov, O., & Hrytsenko, L. (2023). Determining the Safe Distance for Mining Equipment Operation When Forming an Internal Dump in a Deep Open Pit. Sustainability, 15(7), 5912. https://doi.org/10.3390/su15075912

25.      Korniyenko, V. Y., Vasylchuk, O. Y., Zaiets, V. V., Semeniuk, V. V., Khrystyuk, A. O., & Malanchuk, Y. Z. (2022). Research of amber extraction technology by vibroclassifier. IOP Conference Series: Earth and Environmental Science, (1049), 012027. https://doi.org/10.1088/1755-1315/1049/1/012027

26.      Moshynskyi, V. S., Korniienko, V. Y., Malanchuk, Y. Z., Khrystyuk, A. O., Lozynskyi, V. H., & Cabana, E. C. (2021). Simulation of amber extraction processes from sandy and clay rocks with stope filling. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (6), 35-41. https://doi.org/10.33271/nvngu/2021-6/035

27.      Malanchuk, Y., Moshynskyi, V., Khrystyuk, A., Malanchuk, Z., Korniienko, V., & Abdiev, A. (2022). Analysis of the regularities of basalt open-pit fissility for energy efficiency of ore preparation. Mining of Mineral Deposits, 16(1), 68-76. https://doi.org/10.33271/mining16.01.068

28.      Moshynskyi, V., Zhomyruk, R., Semeniuk, V., Okseniuk, R., Rysbekov, K., & Yelemessov, K. (2021). Investigation of technogenic deposits of phosphogypsum dumps. E3S Web of Conferences, (280), 08008. https://doi.org/10.1051/e3sconf/202128008008

29.      Chubenko, V. A., Khinotskaya, A., Yarosh, T., Saithareiev, L., & Baskanbayeva, D. (2022). Investigation of energy-power parameters of thin sheets rolling to improve energy efficiency. IOP Conference Series: Earth and Environmental Science, (1049), 012051. https://doi.org/10.1088/1755-1315/1049/1/012051

30.      Abdoldina, F., Nazirova, A., Dubovenko, Y., & Umirova, G. (2020). On the solution of the gravity direct problem for a sphere with a simulated annealing approach. International Multidisciplinary Scientific GeoConference: SGEM, 20(2.1), 239-245. https://doi.org/10.5593/sgem2020/2.1/s07.031

• < Prev
• Next >